UltraFast Design Methodology

indicates CONFIRMED TO RUN

Course Description

Learn how to improve design speed and reliability by using the UltraFast Design Methodology and the Vivado® Design Suite.
The focus is on:

  • Optimizing system reset design and synchronization circuits
  • Employing best practice HDL coding techniques
  • Applying appropriate timing closure techniques
  • Reviewing an UltraFast Design Methodology case study

PrintLevel

FPGA 3

Training Duration

2 days

Audience

Engineers who seek training for FPGA design best practices that increase design performance and increase development productivity.

Prerequisites

  • Basic HDL knowledge (VHDL or Verilog)
  • Digital design knowledge and experience

Software Tools

  • Vivado Design Suite 2022.2

Hardware

  • Architecture: UltraScale™ FPGAs*
  • Demo board: None*

* This course focuses on the UltraScale and 7 series architectures. Check with your local Authorized Training Provider for specifics or other customizations.

Skills Gained

After completing this comprehensive training, you will have the necessary skills to:

  • Describe the UltraFast™ design methodology checklist
  • Identify key areas to optimize your design to meet your design goals and performance objectives
  • Define a properly constrained design
  • Optimize HDL code to maximize the FPGA resources that are inferred and meet your performance goals
  • Build resets into your system for optimum reliability and design speed
  • Build a more reliable design that is less vulnerable to metastability problems and requires less design debugging later in the development cycle
  • Identify timing closure techniques using the Vivado Design Suite
  • Describe how the UltraFast design methodology techniques work effectively through case studies and lab experience

Course Outline

Day 1

  • UltraFast Design Methodology: Introduction – Introduces the UltraFast Design Methodology and the UltraFast Design Methodology checklist. {Lecture, Demo}
  • UltraFast Design Methodology: Board and Device Planning – Introduces the methodology guidelines on board and device planning. {Lecture}
  • Vivado Design Suite I/O Pin PlanningDescribes the I/O Pin Planning layout for performing pin assignments in a design. {Lecture, Lab}
  • Power Estimation Using XPEIllustrates estimating the amount of resources and default activity rates for a design and evaluating the estimated power calculated
    by XPE. {Lecture, Lab}
  • UltraFast Design Methodology: Design Creation – Introduces the UltraFast methodology guidelines on design creation. {Lecture}
  • RTL DevelopmentCovers RTL and the RTL design flow, recommended coding guidelines, using control signals, and recommendations on resets. {Lecture}
  • Resets – Investigates the impact of using asynchronous resets in a design. {Lecture, Lab}
  • Pipelining – Use pipelining to improve design performance. {Lecture, Lab}
  • Synchronous Design Techniques – Introduces synchronous design techniques used in an FPGA design. {Lecture}
  • Designing with the IP IntegratorDemonstrates how to use the Vivado IP integrator to create the uart_led subsystem. {Lecture, Lab}
  • Creating and Packaging Custom IPCovers creating your own IP and package and including it in the Vivado IP catalog. {Lecture}
  • Revision Control Systems in the Vivado Design Suite – Use version control systems with Vivado design flows. {Lecture}}

Day 2

  • UltraFast Design Methodology: Implementation – Introduces the methodology guidelines on implementation. {Lecture}
  • Incremental Compile Flow – Utilize the incremental compile flow when making last-minute RTL changes. {Lecture}
  • UltraFast Design Methodology Design Closure – Introduces the UltraFast methodology guidelines on design closure. {Lecture}
  • Introduction to Vivado Reports Generate and use Vivado reports to analyze failed paths. {Lecture, Demo}
  • Baselining – Use Xilinx-recommended baselining procedures to progressively meet timing closure. {Lecture, Lab}
  • Clock Domain Crossing and Synchronization Circuits Use synchronization circuits for clock domain crossings. {Lecture}
  • QoR Reports Overview Describes what quality of result (QoR) is and how to analyze the QoR reports generated by the Vivado IDE. {Lecture}
  • Timing Closure Using Physical Optimization Techniques – Use physical optimization techniques for timing closure. {Lecture, Lab}
  • Power Management Techniques Identify techniques used for low power design. {Lecture}
  • Introduction to Floorplanning – Introduction to floorplanning and how to use Pblocks while floorplanning. {Lecture}
  • Congestion – Identifies congestion and addresses congestion issues. {Lecture}
  • Vivado Design Suite Debug Methodology – Understand and follow the debug core recommendations. Employ the debug methodology for debugging a design using the Vivado logic analyzer. {Lecture}

 

FPGA


Date
02 January 2024 - 03 January 2024

Location
Core|Vision
Cereslaan 24
5384 VT
Heesch

Price
€ 0,00
or
20 Xilinx Training Credits

Information
Training brochure

Registration form

Registration on demand, please contact us.